![]() ![]() Like the original, the hammer can be brought to half-cock for loading and unloading, and, of course, to full-cock for shooting. The safety can only be engaged when the hammer is in the uncocked position it works by blocking the trigger and preventing the hammer from being operated. The instruction book would have you load a CO2 capsule at this point, but as the gun comes with all six cartridges already loaded in the cylinder I’d recommend unloading the gun first so you can be absolutely certain it’s safe. Make sure the safety’s off then set the gun to half-cock by pulling back the hammer until you hear the first click. The loading gate on the right-hand side of the action can now be swung away and the cartridges removed. The SAA features a spring-loaded spent case ejector rod lying underneath the barrel – this was necessary on the original to remove. While it’s wonderful to have this working feature on the CO2 replica, it’s not necessary as the cases just drop out to the rear. ![]() The gun can only be decocked from full-cock. To do this, hold onto the hammer, squeeze the trigger and gently guide the hammer back to rest. The pellet is loaded into the back of a cartridge made to resemble the. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |